UET08B11A
- Nominal supply
- 115 V
- Cooling at 115 V
- 8,000 BTU/h
- Heating
- Electric heat
- Plug
- NEMA 5-15P
- Specified circuit / fuse
- 15 A
- CEER at 115 V
- 9.6
Installation: Friedrich USC · required kit included
Kit inclusion refers to the listed installation parts. Confirm sleeve supply separately.
What matches (3)
- Documented sleeve option: Friedrich USC. Installation conditions apply.
- 115 V operation is documented.
- Documented heating type meets your choice; heating output and operating limits still need assessment.
Checks before purchase (4)
- Compare the actual circuit with the exact manufacturer circuit/fuse requirement.
- Exact plug/receptacle configuration needs confirmation.
- Room estimate or model capacity at the selected voltage needs checking.
- Enter 100–2,500 sq ft for the ENERGY STAR chart. Other room sizes need an individual sizing assessment.
Check the exact model at a store
UET08B11A at AJ Madison ↗Model identity checked 2026-10-13
Ordinary store links; no affiliate commission. Confirm the model, nameplate, sleeve, parts, price and availability with the seller before ordering.
Sleeves, required parts and sources
Friedrich USC
Manufacturer sleeve association; listed conditions apply.
Decorative trim ring supplied with chassis · Required for the listed procedure · Included as reported in source
Provided installation kit: specified grille, seals and centering/grounding materials · Required for the listed procedure · Included as reported in source
- The 2026 exact-series brochure requires USC/USEZ for new installations; sleeve is sold separately.
- Follow the recommended USC procedure on printed pages 14–15: use the specified dual-intake grille, seals, centering materials and grounding wire. Remove weather panels before operation. Maintain the prescribed 3/8-inch downward slope from front to back. Optional architectural louver UXAA is sold separately and is not the supplied kit SKU.
- Match actual unit nameplate and grounded supply to the electrical table; capacity must also suit the room.
Friedrich USEZ
Sleeve decision needs review.
Sources disagree on a fit-critical fact. This option cannot be a confirmed fit.
Decorative trim ring supplied with chassis · Required for the listed procedure · Included as reported in source
- The 2026 exact-series brochure requires USC/USEZ for new installations; sleeve is sold separately.
- Use included trim ring and applicable sealing/grille components according to the exact R-32 manual. Remove weather panels before operation.
- Match actual unit nameplate and grounded supply to the electrical table; capacity must also suit the room.
Evidence for this model and installation
- Uni-Fit 2026 brochure — model specifications ↗Printed page 4 / PDF page 4: all ten UCT/UET B-series, final A-suffix R-32 models · Checked 2026-10-13
- Uni-Fit 2026 brochure — electrical requirements ↗Printed page 5 / PDF page 5: exact model groups, circuit/fuse ratings and NEMA plugs · Checked 2026-10-13
- Uni-Fit 2026 brochure — existing sleeve table ↗Printed page 6 / PDF page 6: explicitly named Friedrich WSE column; chassis dimensions and included decorative trim ring · Checked 2026-10-13
- Uni-Fit 2026 brochure — standard features ↗Printed page 3 / PDF page 3: built-in Wi-Fi and cooling/electric-heat series · Checked 2026-10-13
- Uni-Fit R-32 installation manual — WSE and preparation ↗Cover / PDF page 1 exact models; printed/PDF page 8 packing list; printed/PDF pages 14–16: WSE table, generic sleeve preparation, required rear grille, sealing and grounding · Checked 2026-10-13
- Uni-Fit R-32 installation manual — receptacles ↗Cover / PDF page 1 exact voltage groups; printed page 17 / PDF page 17, Table E.1: receptacle and circuit ratings for corresponding UCT/UET voltage groups · Checked 2026-10-13
- Uni-Fit 2026 — native sleeve and new installation ↗Printed page 6: USC/USEZ required for new installation, sold separately; sleeve and finished-opening dimensions; included trim ring. · Checked 2026-10-13
- USEZ sleeve assembly and installation instructions ↗Pages 1, 3 and 5: exact USEZ identity, housing dimensions and supplied rear grille; differs from 2026 combined USC/USEZ dimensions. · Checked 2026-10-13
- Uni-Fit R-32 manual — supplied installation parts ↗Cover / PDF page 1 exact models; printed/PDF page 8 packing list; pages 14–16 provided dual-intake grille and installation methods · Checked 2026-10-13
- AJ Madison — exact UET08B11A destination ↗Product heading and model identity only. Retailer specifications are not used as installation evidence; price and stock are not imported. · Checked 2026-10-13
UCT/UET B-series, final A suffix, R-32; specifications scoped to the 2026 brochure revision 02-19-25