Wall AC FitStart selection
← Back to models

models

Friedrich UCT10B30A

10,000 BTU/h Uni-Fit at the documented 230 V nominal supply. Manufacturer specifications and USC/WSE installation requirements reviewed; verify the actual nameplate and listed conditions before ordering.

Reviewed 2026-10-13

Exact model: UCT10B30ASource 9Source 10Source 11Source 13 · UCT/UET B-series, final A suffix, R-32; specifications scoped to the 2026 brochure revision 02-19-25

Voltage
230 VSource 9
Cooling capacity
10,000 BTU/hSource 9
Heating
Cooling onlySource 9
Rated cooling current
5.5 ASource 9
Specified circuit / fuse
15 ASource 10
Plug
NEMA 6-15PSource 10
Required receptacle
NEMA 6-15RSource 14
Inverter compressor
Not documented
Wi-Fi
YesSource 12
Chassis width
24.25 inSource 11
Chassis height
14.5 inSource 11
Chassis depth
Not documented
Production status
currentSource 9
Seller availability
Not documented

Chassis measurements are descriptive. They do not establish sleeve compatibility. Production status and seller availability are checked separately.

Documented sleeve outcomes

A documented sleeve fit covers the physical combination under its listed conditions. Check electrical requirements separately before purchase.

ModelFit statusCoolingElectrical requirementsRequired / conditional partsWhat to check
Friedrich UCT10B30AUCT/UET B-series, final A suffix, R-32; specifications scoped to the 2026 brochure revision 02-19-25Availability not checkedKit included — install as specifiedSleeve: Friedrich WSESource 10Source 11Source 13Source 14Source 10810,000 BTU/hSource 9230 VSource 9PlugNEMA 6-15PSource 10ReceptacleNEMA 6-15RSource 14Specified circuit / fuse15 ASource 10
  • Provided Uni-Fit installation kit: specified dual-intake grille, seals and centering/grounding materials; confirm package contentsPart number: Not documentedRequired under the listed conditionsSource 13Source 108Package: Included in the unit package — install as specified
  • Included decorative trim ringPart number: Not documentedRequired under the listed conditionsSource 11Source 108Package: Included in the unit package — install as specified
5 installation checks
  • The current brochure and the exact-generation R-32 manual name Friedrich WSE among existing sleeves. Verify that the actual housing is securely installed and structurally sound; do not infer identity from a 27-inch measurement alone.Source 11Source 13
  • Use generic-sleeve Method B on printed page 16, with the specified dual-intake grille, sealing and centering materials and grounding wire. Remove the old rear grille. Optional Method A and architectural louver UXAA on page 15 are specified for USC, not this WSE procedure.Source 13
  • The manual describes a provided installation kit. Confirm that the exact unit package includes the required grille and seals; obtain manufacturer confirmation of replacement part numbers if these pieces are missing. No separate kit SKU is established in this record.Source 13Source 108
  • Use the included decorative trim ring to cover the gap around the smaller chassis. Follow the prescribed sealing and 3/8-inch downward slope from front to back; use the manual’s shimming procedure if needed.Source 11Source 13
  • Check the installation for the exact 230 V model, NEMA 6-15P plug, NEMA 6-15R receptacle and manufacturer-specified 15 A circuit/fuse. Do not derive the circuit from cooling running current.Source 10Source 14
Friedrich UCT10B30AUCT/UET B-series, final A suffix, R-32; specifications scoped to the 2026 brochure revision 02-19-25Availability not checkedKit included — install as specifiedSleeve: Friedrich USCSource 13Source 14Source 99Source 10810,000 BTU/hSource 9230 VSource 9PlugNEMA 6-15PSource 10ReceptacleNEMA 6-15RSource 14Specified circuit / fuse15 ASource 10
  • Decorative trim ring supplied with chassisPart number: Not documentedRequired under the listed conditionsSource 99Source 108Package: Included in the unit package — install as specified
  • Provided installation kit: specified grille, seals and centering/grounding materialsPart number: Not documentedRequired under the listed conditionsSource 13Source 108Package: Included in the unit package — install as specified
3 installation checks
  • The 2026 exact-series brochure requires USC/USEZ for new installations; sleeve is sold separately.Source 99
  • Follow the recommended USC procedure on printed pages 14–15: use the specified dual-intake grille, seals, centering materials and grounding wire. Remove weather panels before operation. Maintain the prescribed 3/8-inch downward slope from front to back. Optional architectural louver UXAA is sold separately and is not the supplied kit SKU.Source 13
  • Match actual unit nameplate and grounded supply to the electrical table; capacity must also suit the room.Source 14
Friedrich UCT10B30AUCT/UET B-series, final A suffix, R-32; specifications scoped to the 2026 brochure revision 02-19-25Availability not checkedMore information neededSleeve: Friedrich USEZSource 13Source 14Source 9910,000 BTU/hSource 9230 VSource 9PlugNEMA 6-15PSource 10ReceptacleNEMA 6-15RSource 14Specified circuit / fuse15 ASource 10
  • Decorative trim ring supplied with chassisPart number: Not documentedRequired under the listed conditionsSource 99Package: Included in the unit package — install as specified
3 installation checks
  • The 2026 exact-series brochure requires USC/USEZ for new installations; sleeve is sold separately.Source 99
  • Use included trim ring and applicable sealing/grille components according to the exact R-32 manual. Remove weather panels before operation.Source 13
  • Match actual unit nameplate and grounded supply to the electrical table; capacity must also suit the room.Source 14
Sources disagree

2026 combined USC/USEZ brochure table lists 25.875 × 15.5 × 16.75 in; the exact USEZ assembly manual lists 26 × 15.625 × 16.875 in. Exact generation drawing needed; unknown instead of selecting a convenient dimension.

Source 99Source 100

2026 combined USC/USEZ brochure table lists 25.875 × 15.5 × 16.75 in; the exact USEZ assembly manual lists 26 × 15.625 × 16.875 in. Exact generation drawing needed; unknown instead of selecting a convenient dimension.

Source 99Source 100

2026 combined USC/USEZ brochure table lists 25.875 × 15.5 × 16.75 in; the exact USEZ assembly manual lists 26 × 15.625 × 16.875 in. Exact generation drawing needed; unknown instead of selecting a convenient dimension.

Source 99Source 100

Manufacturer details ↗

Check the exact model at a store

UCT10B30A at AJ Madison ↗Model identity checked 2026-10-13

Ordinary store links; no affiliate commission. Confirm the model, nameplate, sleeve, parts, price and availability with the seller before ordering.

Sources