Wall AC FitStart selection
← Back to models

models

GE AJEQ12DCXWA

GE AJEQ12DCXWA manufacturer specifications and documented sleeve installation. The required circuit/fuse rating is not established in the reviewed documents; confirm it for the exact unit before purchase.

Reviewed 2026-10-13

Exact model: AJEQ12DCXWASource 51Source 85Source 86Source 106 · 2025/2026 inverter generation; exact full SKU covered by 49-5001195

Voltage
230 VSource 86
Cooling capacity
12,000 BTU/hSource 86
Heating
Electric heatSource 51
Rated cooling current
Not documented
Specified circuit / fuse
Not documented
Plug
Not documented
Required receptacle
Not documented
Inverter compressor
YesSource 51
Wi-Fi
YesSource 86
Chassis width
Not documented
Chassis height
Not documented
Chassis depth
18.25 inSource 51
Production status
currentSource 85
Seller availability
Not documented

Chassis measurements are descriptive. They do not establish sleeve compatibility. Production status and seller availability are checked separately.

Documented sleeve outcomes

A documented sleeve fit covers the physical combination under its listed conditions. Check electrical requirements separately before purchase.

ModelFit statusCoolingElectrical requirementsRequired / conditional partsWhat to check
GE AJEQ12DCXWA2025/2026 inverter generation; exact full SKU covered by 49-5001195Availability not checkedDocumented fit — conditions applySleeve: GE RAB26ASource 51Source 8612,000 BTU/hSource 86230 VSource 86PlugNot documentedReceptacleNot documentedSpecified circuit / fuseNot documented
  • Supplied security bracket and screwsPart number: Not documentedRequired under the listed conditionsSource 51Package: Included in the unit package — install as specified
6 installation checks
  • The exact-model manual recommends RAB26A with the RAG13A rear grille. Use the full sleeve/chassis instructions.Source 51
  • Confirm specified rear grille and airflow. A retained louvered grille must follow the 45-degree instruction; do not substitute a grille by dimensions.Source 51
  • Install the supplied security bracket with its flange behind the sleeve edge, as specified on printed page 16.Source 51
  • Confirm exact unit nameplate, grounded outlet and circuit; remaining unknown electrical fields must be resolved before recommendation.Source 51
  • For a new installation the sleeve is purchased separately from the chassis.Source 86
  • For heat-capable models, apply all page-16 combustible-material clearances: sides 1 in, front and exterior rear 20 in, above 39-3/8 in, below as the manual’s 4-7/8–6-3/8 in range. Resolve the applicable bottom clearance for the actual installation; do not select an endpoint as a general rule.Source 51
GE AJEQ12DCXWA2025/2026 inverter generation; exact full SKU covered by 49-5001195Availability not checkedDocumented fit — conditions applySleeve: GE RAB46BSource 51Source 8612,000 BTU/hSource 86230 VSource 86PlugNot documentedReceptacleNot documentedSpecified circuit / fuseNot documented
  • Supplied security bracket and screwsPart number: Not documentedRequired under the listed conditionsSource 51Package: Included in the unit package — install as specified
6 installation checks
  • The exact-model manual recommends RAB46B with the RAG13A rear grille. Use the full sleeve/chassis instructions.Source 51
  • Confirm specified rear grille and airflow. A retained louvered grille must follow the 45-degree instruction; do not substitute a grille by dimensions.Source 51
  • Install the supplied security bracket with its flange behind the sleeve edge, as specified on printed page 16.Source 51
  • Confirm exact unit nameplate, grounded outlet and circuit; remaining unknown electrical fields must be resolved before recommendation.Source 51
  • For a new installation the sleeve is purchased separately from the chassis.Source 86
  • For heat-capable models, apply all page-16 combustible-material clearances: sides 1 in, front and exterior rear 20 in, above 39-3/8 in, below as the manual’s 4-7/8–6-3/8 in range. Resolve the applicable bottom clearance for the actual installation; do not select an endpoint as a general rule.Source 51

Manufacturer details ↗

Sources

  • [51] GE 26-inch inverter owner and installation manualGE Appliances · Cover lists all six exact AJ models and INVERTER. Printed/PDF pages 15–16: RAB26A/RAB46B with RAG13A, depth without front, supplied security bracket, grille and heat-model clearance requirements. No numeric branch-circuit requirement in the final English manual. · 49-5001195 Rev.0 / 06-26 · Checked 2026-10-13
  • [85] GE AJEQ12DCXWA — manufacturing datesGE Appliances · Owner Center > Manufactured start/end dates; a fixed past end date indicates discontinued production, not lack of retailer stock. · Checked 2026-10-13
  • [86] GE AJEQ12DCXWA — exact product specificationsGE Appliances · Specs & Details: POWER / RATINGS, FEATURES, ACCESSORIES, WEIGHTS & DIMENSIONS; only product specification fields retained. Hidden obsolete/out-of-stock template strings are not lifecycle/stock evidence. · Checked 2026-10-13
  • [101] GE RAB26A sleeve and grille packageGE Appliances · 2023 brochure printed pages 10–11: exact RAB26A housing, finished opening and RAG13A included with new sleeve. Not included with an AC chassis. · OTGEA5063007504 / 2023 · Checked 2026-10-12
  • [106] GE projected Quick Specs — AJEQ12DCXWAGE Appliances · Single-page exact-model sheet: drawing, CEER and plug/circuit rows; explicitly marked Projected specifications — subject to change. Not final electrical evidence. · OTGEA10922568540 / projected / date not stated · Checked 2026-10-12
  • [125] GE RAB46B external dimensionsGE Appliances · Exact model heading and Specs & Details dimensions: 26 W × 15.5 H × 16.75 D in. These are external sleeve dimensions; hidden stock/obsolete templates are not evidence of availability. · Checked 2026-10-13