Wall AC FitStart selection
← Wall sleeves

IDENTIFY YOUR EXISTING SLEEVE

What fits the GE RAB24 sleeve?

GE RAB24 sleeve identity, sourced outside dimensions and model-specific installation outcomes. Unknown requirements and source disagreements remain visible.

4 documented options. 4 with required kit included.

Confirm this is your actual sleeve. Each option has separate installation and electrical requirements.

How to identify it

  • Confirm the exact RAB24 part number; dimensions alone do not establish compatibility.Source 52

Dimensions: three different measurements

Interior dimensions, outside sleeve dimensions and the wall opening are different. These values describe the equipment; they do not prove fit.

Interior width
Not documented
Interior height
Not documented
Interior depth
Not documented
External width
25.5 inSource 124
External height
15.25 inSource 124
External depth
17.5 inSource 124
Wall opening width
Not documented
Wall opening height
Not documented

Replacement options

ModelFit statusCoolingElectrical requirementsRequired / conditional partsWhat to check
GE AKCQ08AXXXA2025/2026 inverter generation; exact full SKU covered by 49-5001293Availability not checkedKit included — install as specifiedSleeve: GE RAB24Source 52Source 927,800 BTU/hSource 92115 VSource 92PlugNEMA 5-15PSource 92ReceptacleNEMA 5-15RSource 52Source 92Source 119Specified circuit / fuseNot documented
  • Supplied grille, seals, trim, grounding wire and 24-inch security brackets; use applicable partsPart number: Not documentedRequired under the listed conditionsSource 52Package: Included in the unit package — install as specified
6 installation checks
  • The exact-model manual recommends RAB24 with the supplied stamped aluminum outdoor grille.Source 52
  • Use the 24-inch sleeve brackets and the applicable sealing, grounding, grille and trim procedures on printed pages 15–24.Source 52
  • Confirm exact nameplate, grounded outlet and circuit; the sleeve association does not prove electrical suitability.Source 52
  • RAB24 sleeve is purchased separately; supplied trim/installation hardware is not a wall sleeve.Source 92
  • Use the applicable sleeve procedure: secure sound housing, required rearward slope, supplied grounding wire with toothed washers, seals and trim; do not leave required hardware unused.Source 52
  • Use the supplied 24-inch brackets for RAB24 or 26-inch brackets for RAB26A, with flanges behind the sleeve edge; attach both sides as specified on page 24.Source 52
GE AKCQ12AXXXA2025/2026 inverter generation; exact full SKU covered by 49-5001293Availability not checkedKit included — install as specifiedSleeve: GE RAB24Source 52Source 9812,000 BTU/hSource 98115 VSource 98PlugNEMA 5-15PSource 98ReceptacleNEMA 5-15RSource 52Source 98Source 119Specified circuit / fuseNot documented
  • Supplied grille, seals, trim, grounding wire and 24-inch security brackets; use applicable partsPart number: Not documentedRequired under the listed conditionsSource 52Package: Included in the unit package — install as specified
6 installation checks
  • The exact-model manual recommends RAB24 with the supplied stamped aluminum outdoor grille.Source 52
  • Use the 24-inch sleeve brackets and the applicable sealing, grounding, grille and trim procedures on printed pages 15–24.Source 52
  • Confirm exact nameplate, grounded outlet and circuit; the sleeve association does not prove electrical suitability.Source 52
  • RAB24 sleeve is purchased separately; supplied trim/installation hardware is not a wall sleeve.Source 98
  • Use the applicable sleeve procedure: secure sound housing, required rearward slope, supplied grounding wire with toothed washers, seals and trim; do not leave required hardware unused.Source 52
  • Use the supplied 24-inch brackets for RAB24 or 26-inch brackets for RAB26A, with flanges behind the sleeve edge; attach both sides as specified on page 24.Source 52
GE AKCQ12DXXXA2025/2026 inverter generation; exact full SKU covered by 49-5001293Availability not checkedKit included — install as specifiedSleeve: GE RAB24Source 52Source 9412,000 BTU/hSource 94230 VSource 94PlugNEMA 6-15PSource 94ReceptacleNEMA 6-15RSource 52Source 94Source 119Specified circuit / fuseNot documented
  • Supplied grille, seals, trim, grounding wire and 24-inch security brackets; use applicable partsPart number: Not documentedRequired under the listed conditionsSource 52Package: Included in the unit package — install as specified
6 installation checks
  • The exact-model manual recommends RAB24 with the supplied stamped aluminum outdoor grille.Source 52
  • Use the 24-inch sleeve brackets and the applicable sealing, grounding, grille and trim procedures on printed pages 15–24.Source 52
  • Confirm exact nameplate, grounded outlet and circuit; the sleeve association does not prove electrical suitability.Source 52
  • RAB24 sleeve is purchased separately; supplied trim/installation hardware is not a wall sleeve.Source 94
  • Use the applicable sleeve procedure: secure sound housing, required rearward slope, supplied grounding wire with toothed washers, seals and trim; do not leave required hardware unused.Source 52
  • Use the supplied 24-inch brackets for RAB24 or 26-inch brackets for RAB26A, with flanges behind the sleeve edge; attach both sides as specified on page 24.Source 52
GE AKVQ12DXXWA2025/2026 inverter generation; exact full SKU covered by 49-5001293Availability not checkedKit included — install as specifiedSleeve: GE RAB24Source 52Source 9612,000 BTU/hSource 96230 VSource 96PlugNEMA 6-20PSource 96ReceptacleNEMA 6-20RSource 52Source 96Source 119Specified circuit / fuseNot documented
  • Supplied grille, seals, trim, grounding wire and 24-inch security brackets; use applicable partsPart number: Not documentedRequired under the listed conditionsSource 52Package: Included in the unit package — install as specified
6 installation checks
  • The exact-model manual recommends RAB24 with the supplied stamped aluminum outdoor grille.Source 52
  • Use the 24-inch sleeve brackets and the applicable sealing, grounding, grille and trim procedures on printed pages 15–24.Source 52
  • Confirm exact nameplate, grounded outlet and circuit; the sleeve association does not prove electrical suitability.Source 52
  • RAB24 sleeve is purchased separately; supplied trim/installation hardware is not a wall sleeve.Source 96
  • Use the applicable sleeve procedure: secure sound housing, required rearward slope, supplied grounding wire with toothed washers, seals and trim; do not leave required hardware unused.Source 52
  • Use the supplied 24-inch brackets for RAB24 or 26-inch brackets for RAB26A, with flanges behind the sleeve edge; attach both sides as specified on page 24.Source 52

Old models documented for this sleeve

No old-model associations have been published yet.

Sources and review

Reviewed 2026-10-13.

  • [52] GE 24-inch inverter owner and installation manualGE Appliances · Cover lists all four exact AK models and INVERTER. Printed/PDF pages 15–19 and 23–24: bare chassis, RAB24/RAB26A, supplied hardware, rearward slope, grounding, GE rear grille, trim and correct 24/26-inch security brackets. RAB26A recommendation spells RAG13 (not RAG13A). No numeric branch-circuit requirement. · 49-5001293 Rev.0 / 09-26 · Checked 2026-10-13
  • [91] GE AKCQ08AXXXA — manufacturing datesGE Appliances · Owner Center > Manufactured start/end dates; a fixed past end date indicates discontinued production, not lack of retailer stock. · Checked 2026-10-13
  • [92] GE AKCQ08AXXXA — exact product specificationsGE Appliances · Specs & Details: POWER / RATINGS, FEATURES, ACCESSORIES, WEIGHTS & DIMENSIONS; only product specification fields retained. Hidden obsolete/out-of-stock template strings are not lifecycle/stock evidence. · Checked 2026-10-13
  • [93] GE AKCQ12DXXXA — manufacturing datesGE Appliances · Owner Center > Manufactured start/end dates; a fixed past end date indicates discontinued production, not lack of retailer stock. · Checked 2026-10-13
  • [94] GE AKCQ12DXXXA — exact product specificationsGE Appliances · Specs & Details: POWER / RATINGS, FEATURES, ACCESSORIES, WEIGHTS & DIMENSIONS; only product specification fields retained. Hidden obsolete/out-of-stock template strings are not lifecycle/stock evidence. · Checked 2026-10-13
  • [95] GE AKVQ12DXXWA — manufacturing datesGE Appliances · Owner Center > Manufactured start/end dates; a fixed past end date indicates discontinued production, not lack of retailer stock. · Checked 2026-10-13
  • [96] GE AKVQ12DXXWA — exact product specificationsGE Appliances · Specs & Details: POWER / RATINGS, FEATURES, ACCESSORIES, WEIGHTS & DIMENSIONS; only product specification fields retained. Hidden obsolete/out-of-stock template strings are not lifecycle/stock evidence. · Checked 2026-10-13
  • [97] GE AKCQ12AXXXA — manufacturing datesGE Appliances · Owner Center > Manufactured start/end dates; a fixed past end date indicates discontinued production, not lack of retailer stock. · Checked 2026-10-13
  • [98] GE AKCQ12AXXXA — exact product specificationsGE Appliances · Specs & Details: POWER / RATINGS, FEATURES, ACCESSORIES, WEIGHTS & DIMENSIONS; only product specification fields retained. Hidden obsolete/out-of-stock template strings are not lifecycle/stock evidence. · Checked 2026-10-13
  • [119] NEMA receptacle configurations — manufacturer referenceLeviton · Printed/PDF page 12: labelled 5-15R, 6-15R and 6-20R face drawings. Used only to identify the matching receptacle drawn in an exact AC manual, never to infer the required breaker. · Q-1101H · Checked 2026-10-13
  • [124] GE RAB24 external dimensionsGE Appliances · Exact model heading and Specs & Details dimensions: 25.5 W × 15.25 H × 17.5 D in. These are external sleeve dimensions; hidden stock/obsolete templates are not evidence of availability. · Checked 2026-10-13